H1, 5/7mm Short Hood with exhaust valve, without collar

H1 Waterproof 5/7 mm Neoprene Hood with Air Vent (without collar)

The Waterproof H1 bonnet is a high quality Waterproof bonnet with valves, made from a blend of 5 and 7mm neoprene, without collar, and equipped with an innovative ventilation system.

The H1 Waterproof Hood 5/7mm with valve and ventilation ensures that the diver’s head is protected even in quite cold water. The diver’s sensitive head gives off enormous amounts of body heat during diving, which can lead to rapid hypothermia – only a well-fitting neoprene head bonnet like the H1 Waterproof Short Hood 5/7 mm can help.

Like all Waterproof products, the Waterproof H1 5/7 mm collarless diving bonnet is a real high-tech product and not just a neoprene bonnet, because it is packed with practical and modern features, such as the innovative venting system.

Every diver knows the problem of air in the headgear, which can mess up the whole buoyancy control, or at least lift the headgear so far off the head that a gush of cold water enters. Unpleasant! Have you ever reached for the scissors to drill a hole in the upper part of the diver’s headgear? The air problem is solved, but now a little cold water always penetrates the bonnet. Waterproof has built an ingenious solution for this into its H1 5/7mm neoprene bonnets: the H.A.V.S. bonnet venting system, as in the Waterproof H1 Short Hood. This system consists of a one-way valve that ensures that air that enters the bonnet can immediately escape to the outside, but water cannot enter the bonnet from the outside. And the Waterproof 5/7 mm neoprene headgear has two of these air vents, so that the air can escape in any position of the head.

From the very flexible and durable neoprene material with I-Span Super Stretch nylon coating for maximum comfort to the perfect fit, the sophisticated cut and the many practical details, the Waterproof H1 5/7 mm short neoprene bonnet without collar leaves nothing to be desired.

The Waterproof H1 5/7 mm short bonnet for diving is made of two material thicknesses to provide maximum protection against the cold and optimum comfort at the same time. The 7mm neoprene in the head area of the Waterproof 5/7 mm bonnet with air release valve packs the diver’s head warmly, and the 5mm neoprene in the neck area ensures a comfortable fit around the neck without constricting the diver when worn.

The Waterproof 5/7 mm short bonnet with air release valve is anatomically shaped and equipped with smooth neoprene cuffs for easy donning and doffing and maximum comfort while diving.

The reflective logos on the forehead and neck of the Waterproof 5/7 mm neoprene bonnet without collar ensure good visibility even in murky water. And, any other wishes? Perhaps a Waterproof bonnet with collar? Then take a look at the Waterproof H1 5/7mm neoprene bonnet with venting system and collar, which you can also find here in our online divestore.