Diving Lamp and Laser Snake

Oceama Snake Diving Torch With Laser

A practical diving torch with integrated laser, that’s what’s behind the new Oceama Snake underwater torch, a dive light from the series of the high-performance Oceama Shark or Oceama Kaiman, upgraded with a switchable laser pointer, which is also available separately as Oceama Laser and has been built into this multifunctional torch, which also convinces with strong light beam, long burn time and robust construction.

With practical laser that can be switched on and off as needed

The Oceama Laser is definitely one of our most popular underwater lights, as there has never been a more practical and effective means of signalling and pointing when diving, whether you want to attract a diver’s attention, point specifically at something underwater or signal at the water surface. Until now, friends of underwater lasers had to carry two waterproof torches in order to be able to use a dive lamp and the underwater laser pointer, and this has now changed – one torch, two functions that can be used separately from each other – ingenious!  Because you can use the Snake as a combination of both light and laser, but you can also use them completely independently – press twice to turn the main light on or off, press and hold to activate the laser (whether the main light is on or not) and thus you can use the torch however you like.

Powerful, focused beam and multiple light levels

A full 2000 lumens, focused into a 6° point beam with light halation, the powerful Snake dive torch offers enough brightness on the highest light level to not only effectively accompany night dives but also to qualify as a torch for wreck diving. If that’s too much for you, you can switch to the lower light level with two quick button presses, which at 500 lumens is still perfectly adequate for a night dive or for illuminating small underminings during the day.

Very robustly built to withstand a lot of pressure

Up to 150m depth you can accompany the dive torch with laser on your dives, because it is made of hard anodised aircraft aluminium with a front screen made of 4mm thick safety glass (tempered glass) and secured with 2 O-rings so that it will not fail even under demanding diving conditions.

Easy operation even in the dark

Even in very poor visibility, you will have no problems operating the Snake underwater torch precisely, because it is equipped with only one push button, which is intuitive to use. 2x short press to turn the main light on and off or to switch between different light levels. 1x long press to activate or deactivate the laser, independently of the main light. This allows you to operate the Snake lamp without difficulty even when wearing thick neoprene gloves and with zero visibility underwater.

Powerful battery with practical charge indicator

The built-in 5000mAh battery can be easily removed from the diving lamp and charged in the supplied charger. The charging time depends on the power plug used, but once fully charged, the battery will provide you with up to 6 hours of light (at the lowest light level). So that you always know how long your torch will keep burning, it is equipped with a practical charge level indicator that you will find directly on the switch in the form of a ring-shaped light source that changes colour depending on the charge level – at the latest when it flashes red, the battery has reached a charge level of only 5% or less and should be recharged.

To ensure maximum safety during charging and lamp operation, the Snake torch is equipped with digital protection against overheating and overcharging, voltage stability and constant current control and reverse polarity protection.